SPECIALTY KIT
AUTOMOTIVE RESTORATORS' BUFFING KIT
Kit includes:
(1) bar MOCO #271 Steel Cutting compound
(1) bar MOCO #2318 W.D. Cut & Color compound
(1) bar MOCO #1571 Cut & Color Tripoli compound
(1) bar MOCO #1062 White Rouge compound
(1) bar MOCO #2181 Green Rouge compound
(2) sections #86/82 spiral sewn buffing wheels, 8" dia. 1/2" arbor hole (or 6"dia where applicable). For "cut buffing"
(2) sections #1 buffing wheel, 8" dia. 1/2" arbor hole (or 6"dia where applicable). For "color buffing"
Products are for use in hand buffing operations on bench mounted buffing machines at approximately 3600 RPMS.
PRODUCT INFORMATION
#271 (dark grey) - most aggressive compound. For use with #86/82 buff for cut on stainless steel and tool steels.
#2318 W.D. (light grey)- less agressive than #271, gives good cut but leaves finer finish. Very clean-working and residue can be cleaned by water based cleaners. Use on #86/82 spirol sewn buff for cut & color on stainless steels, tool steels, brass, and chrominum plate prior to color buffing.
#1571 W.D. (reddish brown)- medium cut tripoli compound for use with #86/82 buff to provide cut & color on non-ferrous materials such as brass and aluminum. Clean working and easy to clean like #2318.
#1062 (white rouge)- use with buff as final finish/color compound for aluminum, brass, bronze, and copper. Also can be used with #86/82 for cut & color on steel and stainless; less agressive than #2318.
#2181 (green rouge)- use with #1 buff to create deep, bright lustre finish on stainless steels and tool steels.
Three different size kits depending on bar size and weight and buff size:
Kit #1 (2" X 2" X 8" bars each weighing approx. 2 pounds) - (8" diameter buffing wheels)
NOTE: priced upon request
Kit #2 (Peanut Molds-each bar weighing approx. 1 pound) - (6" diameter buffs)
NOTE: priced upon request
Kit #3 (1" x 1" x 4" Trays- approx. 6 ounces) and (6" diameter buffing wheels)
NOTE: priced upon request
|
